PacketMan VoIP and Internet Knowledgebase / Email this article

How do I configure the WAG54GP2 to the engin network?

Overview

Step 1: Updating the firmware
Step 2: Accessing the Linksys WAG54GP2
Step 3: Accessing the Advanced Settings
Step 4: Setting up a Time Server
Step 5: Setting up Daylight savings
Step 6: Proxy and Registration
Step 7: Audio configuration
Step 8: Dial Plans

Step 1: Updating the firmware

Before you start you must have frimware version 1.00.03 installed.
packetman.com.au/download/linksys/WAG54GP2-EU_AnnexA_ETSI_v1.00.03.zip

Step 2: Accessing the Linksys WAG54GP2

Login to the WAG54GP2 using 192.168.1.1 via your web browser
Enter the username: admin and password admin
Go to the Voice menu

Step 3: Accessing the Advanced Settings

Go to the SIP tab
Under the SDP Payload section, change the G729a Codec name to G729 (i.e. remove the a).

Step 4 :Setting up a Time Server

You can configure the Linksys WAG54GP2 to automatically retrieve the current date and time (Including daylight savings). To do this you will need to enter in a NTP server.

Go to the System tab and add the following NTP server
You can use the following DNS: 202.61.12.230, 202.61.13.102
Enter Primary NTP Server: au.pool.ntp.org

Step 5 :Setting up Daylight savings

For NSW these settings will work:

Time Zone: GMT+11:00
Daylight Saving Time Rule: start=3/-1/7/3;end=10/-1/7/2;save=-1

Step 6 :Proxy and Registration – LINE 1

Go to LINE 1 and add the following authentication information.
Enter your user data as per the image below

Proxy: byo.engin.com.au
Use Outbound Proxy: Yes
Outbound Proxy: mel or syd.byo.engin.com.au
Register Expires: 900
Display Name: Your Name
User ID: Your engin phone number
Password: your engin password (within the summary page)
Use Auth ID: Yes
AUTH ID: Your engin phone number.
Supported codec’s: g729a & g711a

Step 7 :Audio Configuration

Next, change the Audio Configuration heading.

The following change is required.
Preferred Codec: G711a.

Step 8 : Dial Plans

(Copy and paste the following dial plan at the bottom of the LINE 1 page)

(*xx|13[1-9]xxxS0|1[38]00xxxxxxS0|190xxxxxxx!|000S0|0011xxxxx.|[2-9]xxxxxxxS0|0[2-9]xxxxxxxxS0)

Description
*xx = special *number dial
13[1-9]xxx = dial pizza numbers etc
1[38]00xxxxxx = 1300 and 1800 numbers
190xxxxxxx! = Disable 1900 numbers (remove ! to enable)
000S0= Fire/Police/Ambulance
0011 = International
[2-9]xxxxxxx = any local number
0[2-9]xxxxxxxx = any interstate numbers

Email this article to another user.
* Your name:
Your Email Address:
User's Email Address:
Message for User: