PacketMan VoIP and Internet Knowledgebase / Sipura / Fax Setup /
Email this article to another user.
* Your name:
Your Email Address:
User's Email Address:
Message for User:


How do I set up a fax service for my Sipura SPA-2000 or SPA-3000 unit?
Overview
Step 1: Accessing your SPA2000-3000
Step 2: Accessing the admin section
Step 3: Changing LINE 1
Step 4: Modifying the fax machine


Step 1: Accessing your unit
  1. Connect your phone into the PHONE port of your Sipura ATA
  2. Dial **** then 110#, the SPA will announce the current IP address
  3. Once you have the IP address of your SPA-2000 or 3000 you can access the web interface by opening a web browser and typing the following in the Address: http:/ /< IP Address of SPA> For example: http://192.168.1.10
  4. Enter the username: user and your SIP password
Step 2: Accessing the admin section
  1. Go to the admin login
  2. Enter the username: admin and your SIP password.
  3. Once you login add admin/advanced on to your IP address URL for example: 192.168.1.10/admin/advanced
Step 3: Changing LINE 1
To optimize G711 fallback fax completion rates, please use the following settings in the SPA's "LINE 1" tab:
  • network jitter buffer - very high
  • Jitter buffer adjustment - disable
  • Call Waiting: no
  • 3 Way Calling: no
  • Echo Canceller: no
  • Silence suppression: no
  • Preferred Codec: G711a
  • Use pref. codec only: yes




Step 4: Modifying the fax machine
  1. You may need to lower the Baud rate on your fax machine to 9600 to improve the transmission rate success
  2. You will also need to disable ECM. (Error Correction Mode) on your fax machine.


RSS
Powered by KnowledgebasePublisher (Knowledgebase software)