How do I connect my NB5540 using PPPoE?

Overview
Step 1: Connect your computer to the NB5540
Step 2: Login to the NB5540
Step 3: Connect using encapsulation type PPPoE
Step 4: Check status
Step 5: Verify connection

Step 1: Connect your computer to the NB5540
  1. Connect your computer to one of the four LAN ports on the NetComm Wireless Firewall Router and ensure you have a link. Connect your ADSL modem (supplied by your ISP) to the WAN port of the NetComm Wireless Firewall Router.
  2. Set the Network Card of your computer to use DHCP or assign it an IP address in the range of 192.168.1.2 ~ 254.
Step 2: Login to the NB5540
  1. Open a web browser (ensuring that it is set to access the Internet via the LAN, not by a dialup networking account). Browse to the NetComm Wireless Firewall Router's default IP (192.168.1.1). The main menu of the router should open displaying the “One Page Setup”.
  2. Note: You may be prompted for a log-in, there is no User Name and the Password is "admin".
Step 3: Connect using encapsulation type PPPoE
  1. Go to One Page Setup
  2. Change your “WAN Connection Type” to “PPPoE (ADSL)”.
  3. Set your “User Name” and “Password” as provided by your ISP. If you wish to make services available to external Internet users, even when you are not using Internet services from inside your network, you can choose “Keep Alive”. Alternatively for extra security you can choose “Connect on Demand”.
Step 4: Save settings
  1. Click “Apply”.
  2. You will receive a message indicated your settings were successful
Step 5: Verify connection to the internet
  1. Go to "Status Monitor"
  2. Your NetComm Wireless Firewall Router will attempt to use your settings to connect to your ISP.
  3. Press "Connect" if your NB5540 is not connected