Overview
Step 1: Login to your speedstream modem
- Download the VoIP friendly speedstream firmware
from here: packetman.com.au/dms/out/out.ViewFolder.php
- The Telstra and Optus firmwares are also in this folder if you need to revert back to the supported firmware
.
- Save the file on your desktop
- Run the .exe file
- The following dialog box will appear
- Click on the update firmware
Step 2: Unblock the windows
firewall
application
- The application will search for the device
- Allow the application to run if you have a software firewall
.
Step 3: Update the
firmware
- The update will be successful
- Click OK.
Step 4: Login to the speedstream modem
- Your network card will detect the new IP gateway
address 192.168.254.254
- Enter the username: admin, and password: admin
- Click OK
Step 5: Configure your
ISP
connection
- Go to the WAN
INTERFACE config menu
- Enter VPI: 8, and VCI: 35
- Select VCMUX as the encapsulation type
- Select traffic class as " unspecified" and leave the other options
- Click Next
Step 6: Select PPPoA encapsulation
- Select PPPoA
- Click Next
Step 7: Enter your authentication details
- Enter your Bigpond username and password, likewise for optus customers
- Click Next
Step 8: Configure
WAN
options
- Leave all the default options
- Click Next
Step 9: Enter a static IP (if necessary)
- Enter your static IP (most customers will not have this)
- Click Next
- Use Firewall
select Yes:
- Use DoS protection select: Yes
- Enable NAPT
- Select Next
Step 11: Choose the connection name
- Enter the name you want for this connection
- Select Next
Step 12: The wizard is finished
- The Wizard is now finished
- Select Finish
Step 13: Check the status of your connection
- Go to the PPP connection menu
- Hit connect ( it should say connected with the current WAN
IP address
you are connected to)
