Search VoIP Help:     Adv search
Browse by Manufacturer:
KB Number
PacketMan VoIP and Internet Knowledgebase / Linksys / Firmware Update / Other /

I use MAC OSX, but I can't use the upgrade tool to update my firmware? What can I do?
Print
Email this article
Views: 535
Votes: 0
Posted: 28 Nov, 2007
by: Engin *.
Updated: 28 Nov, 2007
by: Engin *.
Overview
Step 1: Access the Linksys ATA
Step 2: Access admin
Step 3: Enable Provisioning
Step 4: Resync
Step 5: Reboot

Step 1: Accessing your unit
  1. Connect your phone into the PHONE port of your Linksys ATA .
  2. Dial **** then 110#, the SPA-3102 will announce the current IP address
  3. Once you have the IP address of your SPA-3102 you can access the web interface by opening a web browser and typing the following in the Address: http:/ /< IP Address of SPA-3102> For example: http://192.168.1.10
Step 2: Access admin
  1. Go to Voice > Admin Login > Advanced
  2. Click the URL
  3. If a username and password login appears enter username" admin, and your engin SIP password.
  4. If you decide to lock down the user side of the SPA-3102, the username is"user"





Step 3:  Provisioning  Tab
  1. Go to the Provisioning Tab
  2. Enable Provisioning and copy "http://packetman.com.au/spa/config/spa3102/5.1.7fw.cfg" into the profile rule as shown below. Note: The config does not contain any specific authentication settings.
  3. Submit and save all changes

Step 4: Resync your rule
  1. Once your SPA has rebooted, type "resync?" after the admin/ in the URL string as shown below
  2. You will receive a message "SPA will resync the profile rule"

Step 5: Reboot
  1. Once your SPA has rebooted, type "reboot" after the admin/ in the URL string as shown below.
  2. You will receive a message "SPA will reboot" and you should here your SPA-3102 click which indicates the update was successful and the SPA has rebooted.
Others in this Category
document How can I determine the current firmware version of my Linksys modem / router?
document How do I update my Linksys modem / router firmware?


RSS
Powered by KnowledgebasePublisher (Knowledgebase software)