Please note you will need to enter the * key to define the periods in the IP address ie: 10*0*0*10 = 10.0.0.10. Make sure to hang up between each part of this step. After picking up the phone, dial **** to re-enter the config menu.

1. Dial ****, once you hear the voice, dial 101# followed by 0# 1  - Hang up.
2. Dial **** once you hear the voice, dial 111#, then 192*168*1*10# 1 - Hang up.
3. Dial **** once you hear the voice, dial 121#, then 255*255*255*0# 1    - Hang up.
4. Dial **** once you hear the voice, dial 131#, then 192*168*1*254# 1   -Hang up.  

1. Dial **** 100 # to listen to the state of DHCP (voice should say ‘disabled’)
2. Dial **** 110 # to listen to your IP address (should say 192.168.1.10)
3. Dial **** 120 # to listen to your Subnet Mask (should say 255.255.255.0)
4. Dial **** 130 # to listen to your Default Gateway (should say 192.168.1.254)

1. First login by going to your web browser and typing http://192.168.1.254
   
2. enter the username: root, password 0P3N

1. Go to the Advanced
2. Go to Port Forwarding

1. Go to the User Tab
2. Click the New Tab

1. The Rule Management interface will appear
   
2. Enter the Rule name as " engin"
   
3. Enter Protocol "UDP"
4. Enter Port Start  "5060"
5. Enter Port End" "5060"
6. Enter Port Map "5060"

1. You can enter enter ports 16384-20384 under the same name as " engin"  Repeat the same process of RTP ports.
2. Enter Protocol "UDP"
3. Enter Port Start  "16384"
4. Enter Port End" "20384"
5. Enter Port Map "16384"

1. Select the LAN connection. In almost all cases this will be the default LAN group 1
   
2. Enter the engin voicebox IP as 192.168.1.10
   
3. Click Apply
   

1. Go back to the "User" PF menu option
   
2. Select the rule name "engin"
3. Ensure the rule is configured to the IP address of 192.168.1.10
4. Click Apply
5. Save all changes