Search VoIP Help:     Adv search
Browse by Manufacturer:
KB Number
PacketMan VoIP and Internet Knowledgebase / D-Link / DSL Series / Port Forwarding /

I have an engin 121, how do I setup a static IP and configure port forwarding via my D-Link DSL-series modem / router?
Print
Email this article
Views: 553
Votes: 0
Posted: 27 Oct, 2007
by: Engin *.
Updated: 27 Oct, 2007
by: Engin *.
Overview
Step 1: Login to your D-Link DSL modem
Step 2: Check the DHCP table
Step 3: Login to the engin 121
Step 4: Change WAN IP address
Step 5: Disable NAT
Step 6: Enter DNS
Step 7: Re-Login to your D-Link DSL modem
Step 8: Virtual Server Menu
Step 9: Add Rule
Step 10: Add Applied Rule
Step 11: Apply and reboot

Step 1: Login to your D-Link DSL series modem
  1. Login to your router or modem using 10.1.1.1
  2. Type in the default User Name admin and default Password admin for the username
    or leave the password field blank.
Step 2: Check the DHCP table
  1. Go to Home > DHCP table
  2. You should see a MAC address of 00:30:0A with host name "[] " connected to your router or modem.
  3. Make a note of the IP address , and enter this value into your web browser. It might be 10.1.1.2 or 10.1.1.3 depending how many LAN clients you have connected.

Step 3: Login to the engin 121

  1. If this doesn't work, connect the 121 directly to your PC with an Ethernet cable from the ‘Ethernet’ socket on the back of the 121 and enter 10.0.0.99 into your web browser
  2. Enter the username: admin, and password: engin to access the engin 121 phone
Step 4: Changing the WAN IP address


  1. When you have logged in, go to the BASIC menu
  2. Go to the WAN menu
  3. Disable Bridge
  4. Enable IGMP
  5. Change IP address to 10.1.1.10
  6. Change subnet to 255.0.0.0
  7. Change gateway to 10.1.1.1
  8. Disable DHCP Client
 

Step 5: Disabling NAT
  1. Go to the NAT menu
  2. Disable NAT

Step 6: Entering DNS
  1. Disable DNS Proxy
  2. Disable Auto Discovery
  3. Enable User Configuration
  4. For DNS Proxy, enter the IP address of 10.1.1.1
  5. Save and reboot your settings.

 

Step 7: Re-Login to your DSL modem
  1. To use the web-based management software, launch a suitable web browser and direct it to the IP address of the Router.
  2. Type in http:// followed by the default IP address , 10.1.1.1 in the address bar of the browser. The URL in the address bar should read: http://10.1.1.1 A dialog box prompts for the User Name and Password.
  3. Type in the default User Name admin and default Password admin for the username
    or leave the password field blank.
  4. Click the OK button to access the web-based manager.
Step 8: Virtual Server Menu
  1. Click on the Advanced > Virtual Server
  2. Go to User and click Add


Step 9: Add Rule
  1. Enter rule name: engin
  2. Enter Protocol: UDP
  3. Enter Start port: 5060
  4. Enter End port: 5060
  5. Enter Port Map: 5060
  6. Click Apply


Step 10: Add Rule Applied
  1. The Rule should now be defined under the user category
  2. Click Apply


Step 11: Apply engin Rule and Reboot
  1. Go to user and add the rule "engin" and add it to applied rules.
  2. Click Apply
  3. Save your settings and reboot
Others in this Category
document I have an engin voicebox series 1 or 2, how do I setup a static IP and configure port forwarding via the D-Link DSL series modem?
document I have an engin 221, How do I setup port forwarding and static IP via the D-Link DSL series modem?
document How do I setup port forwarding and static IP for my engin SPA-3102 via the D-Link DSL series modem?


RSS
Powered by KnowledgebasePublisher (Knowledgebase software)