1. Connect your phone into the PHONE port of your Linksys ATA .
2. Dial **** then 110#, the SPA will announce the current IP address
3. Once you have the IP address of your SPA-3100 you can access the web interface by opening a web browser and typing the following in the Address: http:/ /< IP Address of SPA-3102> For example: http://192.168.1.10
4. You should now see the Linksys Phone Adapter Configuration screen.
   
5. Click on Admin Login on the right hand side

1. Enter the username: admin and your SIP password
2. Click on Advanced. You can also go directly to the admin/advanced section by typing: http://192.168.1.10/admin/advanced

The following changes are optional, however they will make your SPA-3000 sound more Australian. Under the Call Progress Tones and Distinctive Ring Patterns headings change:

Dial tone: 400@-19,425@-19,450@-19;10(*/0/1+2+3)
Busy Tone: 425@-19;10(.375/.375/1)
Reorder Tone: 425@-19, 425@-29;60(.375/.375/1,.375/.375/2)
Ring Back Tone: 400@-19,425@-19,450@-19;*(.4/.2/1+2+3,.4/2/1+2+3)
MWI Dial Tone: 400@-19,425@-19,450@-19;2(.1/.1/1+2);10(*/0/1+2)
Ring1 Cadence: 60(.4/.2,.4/2)



 

---

The following changes are required under the Control Timer heading: Interdigit long timer: 6




The following changes are required under the Miscellaneous heading :
FXS Port Impedance: 220+820||115nF

---