Search VoIP Help:     Adv search
Browse by Manufacturer:
KB Number
PacketMan VoIP and Internet Knowledgebase / Linksys / Features & Dial Plans /

I have a Linksys SPA- 3102, how do I setup a feature to block and unblock my engin Caller ID?
Print
Email this article
Views: 1262
Votes: 0
Posted: 23 Aug, 2007
by: Engin *.
Updated: 11 Jul, 2008
by: Engin *.
Overview
Step 1: Access the Linksys SPA-3102 ATA
Step 2: Access LINE 1
Step 3: Adding a Gateway Account
Step 3: Changing the Dial Plan

With this method, You can prepend 1831 into your dial plan so all calls will hide CID, however when you dial #68, you will be able to dial any number with your caller ID shown on a call by call basis. You will be able to tell if the feature is invoked, by a difference in dial tone. (In between the Australian and American dial tone)

Step 1: Accessing your unit
  1. Connect your phone into the PHONE port of your Linksys ATA .
  2. Dial **** then 110#, the SPA-3102 will announce the current IP address
  3. Once you have the IP address of your SPA-3102 you can access the web interface by opening a web browser and typing the following in the Address: http:/ /< IP Address of SPA-3102> For example: http://192.168.1.10
Step 2: Access LINE 1
  1. Go to Voice > Admin Login > Advanced
  2. Click the URL
  3. If a username and password login appears enter username" admin, and your engin SIP password.
  4. If you decide to lock down the user side of the SPA-3102, the username is"user"





Step 3: Update the dial plan
  1. Go to LINE 1
  2. Enter the following information under the Gateway Heading
    • Gateway 1: syd.byo.engin.com.au
    • GW1 Auth ID: Your engin number (0280040000)
    • GW1 Auth ID: Your SIP password

  3. Enter the following dial plan into LINE 1 of the Linksys web menu (at the bottom of the page)
  4. Ensure the full dial plan is copied. It should end and start with a bracket to close the rule
  5. Copy the relevant dial plan for your state and submit all changes.



Victoria/ Tasmania
(*xx | <:TOMB>000 | <:OTMB>13xxxx | <:183103>xxxxxxxx |1[38]00xxxxxx| <#68,:>xx.<:@gw1>|<:1831>xxxxxxxxxx | xxxxxx | xxxxxxxxxxxxxxxxxx |<#,:>xx.<:@gw0>| 190*.!)

WA
(*xx | <:TOPT>000 | <:OTPT>13xxxx | <:183108>xxxxxxxx |1[38]00xxxxxx| <#68,:>xx.<:@gw1>|<:1831>xxxxxxxxxx | xxxxxx | xxxxxxxxxxxxxxxxxx |<#,:>xx.<:@gw0>| 190*.!)

NSW
(*xx | <:TOSP>000 | <:OTSP>13xxxx | <:183102>xxxxxxxx |1[38]00xxxxxx| <#68,:>xx.<:@gw1>|<:1831>xxxxxxxxxx | xxxxxx | xxxxxxxxxxxxxxxxxx |<#,:>xx.<:@gw0>| 190*.!)

QLD
(*xx | <:TOBB>000 | <:OTBB>13xxxx | <:183107>xxxxxxxx |1[38]00xxxxxx| <#68,:>xx.<:@gw1>|<:1831>xxxxxxxxxx | xxxxxx | xxxxxxxxxxxxxxxxxx |<#,:>xx.<:@gw0>| 190*.!)

SA
(*xx | <:TOAD>000 | <:OTAD>13xxxx | <:183108>xxxxxxxx |1[38]00xxxxxx| <#68,:>xx.<:@gw1>|<:1831>xxxxxxxxxx | xxxxxx | xxxxxxxxxxxxxxxxxx |<#,:>xx.<:@gw0>| 190*.!)
Others in this Category
document SPA-3102 Vertical Service Activation Codes
document How do I setup a dial plan to block mobile calls from my SPA-3102?
document How do I setup the PSTN to VoIP gateway feature on the SPA-3102?
document I have a Linksys SPA- 3102, how do I block my Caller ID permanently?
document I have a Linksys SPA- 3102, how do I add terminate other calls thru my PSTN service provider?
document How do I setup a different ring for certain inbound calls via my Linksys SPA-3102?
document How do I setup a speed dial for my Linksys SPA-3102?


RSS
Powered by KnowledgebasePublisher (Knowledgebase software)