Search VoIP Help:     Adv search
Browse by Manufacturer:
KB Number
PacketMan VoIP and Internet Knowledgebase / TP-Link / Port Forwarding /

I have an engin voicebox series 1 or 2, how do I setup a static IP and configure port forwarding via a TP-Link router?
Print
Email this article
Views: 637
Votes: 0
Posted: 17 Aug, 2007
by: Engin *.
Updated: 30 Nov, 2007
by: Engin *.
Overview
Step 1: Assign the IP
Step 2: Check your Implementation
Step 3: Login to your modem
Step 4: Port Forwarding
Step 5: Setup SIP services

Please note you will need to enter the * key to define the periods in the IP address ie: 10*0*0*10 = 10.0.0.10. Make sure to hang up between each part of this step. After picking up the phone, dial **** to re-enter the config menu.

Step 1: Assign the static IP
  1. Dial ****, once you hear the voice, dial 101# followed by 0# 1  - Hang up.
  2. Dial **** once you hear the voice, dial 111#, then 192*168*1*10# 1 - Hang up.
  3. Dial **** once you hear the voice, dial 121#, then 255*255*255*0# 1    - Hang up.
  4. Dial **** once you hear the voice, dial 131#, then 192*168*1*1# 1   -Hang up.  
Step 2: To check that you have implemented this correctly
  1. Dial **** 100 # to listen to the state of DHCP (voice should say ‘disabled’)
  2. Dial **** 110 # to listen to your IP address (should say 192.168.1.10)
  3. Dial **** 120 # to listen to your Subnet Mask (should say 255.255.255.0)
  4. Dial **** 130 # to listen to your Default Gateway (should say 192.168.1.1)
Step 3: Login to your TP-link router
  1. Start your web browser and type the private IP address of the Router in the URL field: http://192.168.1.1
  2. After connecting to the device, you will be prompted to enter username and password. By default, the username is admin and the password is admin. See the example for running under Windows XP.
Step 4: Setup Port Forwarding
  1. Go to Forwarding> Virtual Servers
  2. Add a new Rule


Step 5: Setup SIP as a service
  1. Enter Service Name: SIP
  2. Enter Service Port: 5060
  3. Enter IP address : 192.168.1.10
  4. Save all changes
Others in this Category
document I have an engin 221 , how do I setup a static IP and configure port forwarding via a TP-Link router?
document I have a SPA-3102, how do I setup a static IP and configure port forwarding via my TP-Link router?
document I have an SPA-3102, how do I setup a static IP and configure port forwarding via my TP-Link 8810/8840?
document I have a SPA-3102, how do I setup port forwarding and a static IP via my TL-WR541G / WR542G router?


RSS
Powered by KnowledgebasePublisher (Knowledgebase software)