1. Connect your phone into the PHONE port of your Sipura ATA .
2. Dial **** then 110#, the SPA will announce the current IP address
3. Once you have the IP address of your SPA-3000 you can access the web interface by opening a web browser and typing the following in the Address: http:/ /< IP Address of SPA-3000> For example: http://192.168.1.10
4. Enter the username: user and and your SIP password
   
5. You should now see the Sipura SPA-3000 Phone Adapter Configuration screen.
6. Click on the admin login ink
   

1. Enter the username: admin and your SIP password
2. Click on the advanced Link

1. Go to the LINE 1 tab
2. Go to the Proxy and Authentication Heading

 

Enter the below user data into the fields above

• Proxy: byo.engin.com.au
• Outbound Proxy: syd.byo.engin.com.au
• Use Outbound Proxy: Yes
• Use OB proxy in dialog: Yes
• Register Expires: 900
• Use DNS Srv: Yes
• Use DNS Srv Auto Prefix: Yes
• Display Name: Your Name
• User ID: Your engin phone number. For example 0280040000
  
• Password: your engin SIP password. This is 8 characters in length. For example: uwSqe721
  
• Use Auth ID: Yes
• AUTH ID: Your engin phone number.
• Supported codec ’s: G729a & G711a

1. The next thing that needs to be altered is under the Audio Configuration heading.
2. The following change is required.
3. Select Preferred Codec : G729a.
4. You can change the codec to G711a and disable silent suppression to make your service sound more like the PSTN (Telstra or Optus)

(copy and paste the following dial plan at the bottom section of the LINE 1 page)
(*xx|13[1-9]xxxS0|1[38]00xxxxxxS0|190xxxxxxx!|000S0<:@gw0>|<#,:>xx.<:@gw0>|0011xxxxx.|[2-9]xxxxxxxS0|0[2-9]xxxxxxxxS0)

Description
*xx = special *number dial
13[1-9]xxx = dial pizza numbers etc
1[38]00xxxxxx = 1300 and 1800 numbers
190xxxxxxx! = Disable 1900 numbers (remove ! to enable)
000<:@gw0> = Fire/Police/Ambulance
0011 = International
[2-9]xxxxxxx = any local number
0[2-9]xxxxxxxx = any interstate numbers
 <#,:>xx.<:@gw0> = Press the # key to dial out the PSTN