Please note you will need to enter the * key to define the periods in the IP address ie: 10*0*0*10 = 10.0.0.10. Make sure to hang up between each part of this step. After picking up the phone, dial **** to re-enter the config menu.

1. Dial ****, once you hear the voice, dial 101# followed by 0# 1  - Hang up.
2. Dial **** once you hear the voice, dial 111#, then 192*168*1*10# 1 - Hang up.
3. Dial **** once you hear the voice, dial 121#, then 255*255*255*0# 1    - Hang up.
4. Dial **** once you hear the voice, dial 131#, then 192*168*1*1# 1   -Hang up.  

1. Dial **** 100 # to listen to the state of DHCP (voice should say ‘disabled’)
2. Dial **** 110 # to listen to your IP address (should say 192.168.1.10)
3. Dial **** 120 # to listen to your Subnet Mask (should say 255.255.255.0)
4. Dial **** 130 # to listen to your Default Gateway (should say 192.168.1.1)

1. Login to the modem via the web browser and enter the following IP address http://192.168.1.1
2. Enter the Username: admin, Password: 1234

1. Go to the Advanced Setup menu
2. Click NAT > SUA ONLY
   
3. Enter the first rule as the following:  Start and end port 5060. Forward to IP address 192.168.1.10
4. Enter the second rule as the following:  Start port 16384 end port 20384. Forward to IP address 192.168.1.10
5. Save changes

---