Search VoIP Help:     Adv search
Browse by Manufacturer:
KB Number
PacketMan VoIP and Internet Knowledgebase / Linksys / Regional changes / How do I setup my Linksys WRT54GP2 or RT31P2 to Australian dial tone standards?

How do I setup my Linksys WRT54GP2 or RT31P2 to Australian dial tone standards?
Print
Email this article
Views: 1088
Votes: 0
Posted: 05 Jun, 2007
by: Engin *.
Updated: 14 Aug, 2008
by: Engin *.
Overview
Step 1: Accessing the Linksys WRT54GP2 or RT31P2
Step 2: The Regional Page
Step 3: Control Timer
Step 4: Miscellaneous

Step 1: Accessing the Linksys WRT54GP2 or RT31P2
  1. Login to your device by the IP address of 192.168.15.1
  2. Enter the username: admin, and password: admin
  3. When you have successfully authenticated, enter http://192.168.15.1/Voice_adminPage.htm into your web browser
  4. Enter the username: admin, and your SIP password
Step 2: The Regional Page
  1. Go to the Regional tab
  2. Make the following changes
Dial tone: 400@-19,425@-19,450@-19;10(*/0/1+2+3)
Busy Tone: 425@-19;10(.375/.375/1)
Reorder Tone: 425@-19, 425@-29;60(.375/.375/1,.375/.375/2)
Ring Back Tone: 400@-19,425@-19,450@-19;*(.4/.2/1+2+3,.4/2/1+2+3)
MWI Dial Tone: 400@-19,425@-19,450@-19;2(.1/.1/1+2);10(*/0/1+2)
Ring1 Cadence: 60(.4/.2,.4/2)


Step 3: Control Timer
  1. Go to the Control Timer Value Heading
  2. Change Interdigit long Timer to 6



Step 4: Change FXS Impedance

  1. Go to the Miscellaneous Heading
  2. Change FXS Port Impedance to 220+820||115nF
Others in this Category
document I have a Linksys SPA- 3102 and I use a DORO handset but my DTMF tones are not working?
document How do I setup my SPA-3102 to Australian Standards?


RSS
Powered by KnowledgebasePublisher (Knowledgebase software)