Search VoIP Help:     Adv search
Browse by Manufacturer:
KB Number
PacketMan VoIP and Internet Knowledgebase / Netcomm / Internet Setup Guides / How do I bridge my Netcomm NB1 modem?

How do I bridge my Netcomm NB1 modem?
Print
Email this article
Views: 1052
Votes: 0
Posted: 17 May, 2007
by: Engin *.
Updated: 27 Oct, 2008
by: Engin *.
Overview
Step 1: Login to the NB1
Step 2: Easy Config changes
Step 3: Bridge your NB1
Step 4: LAN Configuration
Step 5: Disable DHCP
Step 6: Reboot


Step 1: Login to your NB1
  1. Open your web browser.
  2. Type the default IP address http://192.168.1.1 and press Enter.
  3. Enter the NB1 Username and Password. The default user name is ‘admin’ and the password is ‘admin’ (Both username and password are case sensitive on these units).
Step 2: Easy Config changes
  1. Go to Easy Config
  2. For Type: select Bridge.
  3. Click Apply
  4. Click Advanced Settings

Step 3: Bridge your NB1
  1. Go to Setup > Bridge
  2. Enter Name: Bridge.
  3. Select Type: Bridge.
  4. Select the LAN group. In most cases this will be LAN GROUP 1
  5. Click Apply

Step 4: LAN Configuration
  1. Go to Setup
  2. Select LAN configuration.
  3. Click Configure

Step 5: Disable DHCP
  1. Once you are in the"Configure screen" scroll down to the bottom of the page
  2. Disable "Server and DHCP relay"
  3. Click Apply
Step 6: Reboot your NB1
  1. Go to Tools > System Commands
  2. Click Save All
  3. Click Restart
  4. Your NB1 Should be bridged
Others in this Category
document How do I setup my Netcomm NB6, NB6PLUS4 to the engin nDSL network?
document How do I connect my NB5540 using PPPoE?
document How do I setup my Netcomm NB9W to the engin nDSL network?
document How do I setup my Netcomm NB5PLUS4 to the engin nDSL network?
document How do I bridge my Netcomm NB5 modem?
document How do I setup my Netcomm NB5 modem to the engin nDSL network?


RSS
Powered by KnowledgebasePublisher (Knowledgebase software)